The place to pay attention to when using the heaven and earth cover forming machine

Ground cover is the name of a kind of packaging, and the heaven and earth cover forming machine is used to produce such a device as the heaven and earth cover. However, in the process of use, many problems are prone to occur. So what exactly are the factors that affect it? Let's take a look.

First of all, the heaven and earth cover molding machine is installed in an air-conditioned room, and the temperature is controlled at 18-24°C. If you operate in such an environment, the high power of the machine will be utilized, and the amount of adhesive used will be more and more economical. Staff are also generally willing to work in such an environment.

The second is that the adhesive quality of the heaven and earth cover molding machine is poor or too much solvent is added. Low binder concentration, low viscosity, poor packability. Try to use better glue raw materials and sensitively grasp the glue concentration. The nozzle seat guide rail of the heaven and earth cover forming machine should be lifted, wiped and injected with grease. The screw drive part should be kept clean to prevent dust from clogging the slider. At the same time, it should be fully lubricated to maintain a long life.

The third is that the gray cardboard is cut with a paper cutter. Because the cutting edge of the gray board will be left, it is easy to produce empty edges or loose edges during the manufacturing process of the heaven and earth cover forming machine. It is generally recommended to cut the gray board with a decoupage and print the literature to prevent this.

Fourth, if the flatness of the bed mold platform is different, it should be adjusted to flatness. When the door is opened delayed, there is no glue between the glue outlet of the glue head and the glue valve, because there is a distance between the glue outlet of the glue head and the glue valve. If the rubber head starts moving immediately after opening the rubber head output port, it will cause a small lack of glue at the beginning of the track. The nozzle seat guide r