Maintenance of feeder gluing machine

1. The belt of the automatic fly-on gluer should be wiped with water at ordinary times, so as to keep it clean and free of glue marks, and prevent slipping, especially to prevent it from sticking to the belt. The glue wheel and the glue box must be cleaned after shutting down every day, otherwise the glue in the glue box will freeze and affect the gluing effect.

2. The machinery should be kept clean and cleaned frequently to ensure that there is no dust on the pasting machine.

3. The glue box on the glue part of this fold should be kept clean and scrubbed frequently.

4. The inner row plate support, shaft and compass rod of the automatic paper pasting machine should be cleaned frequently, and the lubricating oil and butter can be appropriately added, and the two mixtures have a better effect, which can be shaken left and right to prevent rust.

5. It is strictly forbidden to regulate the speed when the governor stops, otherwise the belt will be worn very seriously.

6. It is best to drive slowly before starting, check whether there is any abnormal situation in the machine, and then slowly increase the speed as needed after confirming that there is no abnormal situation.